Uline Ice Maker Moderate Severity
E12

E12 – Ice Maker error code

Uline Ice Maker error code

E12 commonly involves a fill or harvest-related sensor on Uline ice machines—either the inlet valve, the float / level sensor, or a switch the firmware uses to confirm a cycle step.

Note your water-filter date and whether the supply valve is fully open. Ice machines are sensitive to filter age and supply temperature; we factor both into the first visit.

Book with Uline Appliance Support at 844-683-0648.

Call 844-532-0909 Reserve repair

At a glance

E12 on Uline

  • ApplianceIce Maker
  • SeverityModerate Severity
  • DIY checksTechnician advised

Book Uline repair

Contact Uline Appliance Support for repair at 844-532-0909—mention code E12 when you call.

844-532-0909 Schedule appointment

Related service

Uline Ice Maker Repair

OEM or manufacturer-cleared parts when available · invoice-backed coverage when applicable

View service page →
Before the visit

Quick troubleshooting steps

  • Note the exact error code and any indicators (sounds, smells, leaks).

  • Try power cycling the appliance (unplug for 60 seconds).

  • Review the diagnostics notes in the reference guide below.

  • If the code returns, call Uline Appliance Support at 844-532-0909.

Professional service recommended. This error often involves electrical or sealed-system components. For safety, we recommend professional diagnostics before further use.

Reference guide

Uline Ice Maker · code E12

Code-specific guidance for E12

E12 commonly involves a fill or harvest-related sensor on Uline ice machines—either the inlet valve, the float / level sensor, or a switch the firmware uses to confirm a cycle step.

Note your water-filter date and whether the supply valve is fully open. Ice machines are sensitive to filter age and supply temperature; we factor both into the first visit.

Book with Uline Appliance Support at 844-532-0909.

What to track before you call

  • Exact timing: note which cycle step, mode, or temperature setting triggered E12.
  • Repeatability: record whether the code returns immediately after reset or only under heavier demand.
  • Related symptoms: capture any unusual sounds, heat changes, leaks, smells, or electrical trips.
  • Model details: keep model and serial ready so we can route the right parts and test path.

Contact Uline Appliance Support for repair

For Uline Ice Maker repair and code E12, call 844-532-0909 or use our schedule appointment page to reach the same dispatch team.

FAQ

Uline service—answered clearly

Process, pricing, and what to expect during your visit.

Stop production cycles when codes repeat. P1 is often a production-related state and E11 / E12 / E13 typically relate to control logic the appliance flags during a self-check. Drain or skip the next harvest cycle until we diagnose.

Yes. Uline produces nugget, crescent, and clear-ice machines with different harvest and water-fill paths. Tell us the ice style your unit makes when you call—it changes the first tests we run.

Water filter age, supply temperature, and condenser dust can all reduce performance before a code appears. Note the last filter date and recent kitchen work—we factor those into the visit.

Prefer to talk it through? Call Uline Appliance Support.

844-532-0909
Book a visit

Tell us what’s wrong.
We’ll be there with parts.

Submit a few details and a dispatcher confirms a two-hour arrival window. Need it today? Call—we route the next available technician to your zip.

  • Two-hour arrival windows—not all-day blocks.
  • Truck stocked with manufacturer-approved parts.
  • Written estimate before labor begins, every time.
  • 30-day workmanship warranty on every qualifying repair.
844-532-0909 Message us

Request a visit

Avg reply · 5 min