Free estimate on approved repairs
844-532-0909
Error library · ULINE
5 references below—open any card for meaning, severity, and when to book. Call 844-532-0909 for Uline repair or schedule appointment.
Indexed codes
5
Brand
Uline
Family
Trash Compactor
Severity is a quick triage hint—not a substitute for in-home diagnostics.
E1 on a Uline trash compactor is the published sensor / thermistor open code—the control sees an open circuit where it expects a working sensor signal.The compactor may still cycle for short bursts. Pause use before force-feeding large bags; running with a sensor error stresses the motor and…
Open referenceE2 on a Uline trash compactor is the published sensor / thermistor shorted code—the same sensor circuit as E1, but reading as a short rather than an open. The control treats it as out-of-range and may park the appliance in a safe state.Do not run multiple cycles back-to-back…
Open referenceE3 on a Uline trash compactor is published as door / drawer open too long. The control logs E3 when it expects the drawer to be closed for a cycle but sees the open state longer than its timeout.Confirm nothing is blocking the drawer track (bags pushed too…
Open referenceE11 (also displayed as EE on some Uline series) is the published EEPROM / control-board memory error. The appliance has flagged a memory or stored-data check that it cannot verify.Avoid repeated power-cycle resets—each one stresses the same memory the board is trying to read. Photograph the display and…
Open referenceER on a Uline trash compactor is the published general control / system error—a catch-all the firmware uses when something outside the named sensor or door checks goes wrong.Document what the appliance was doing when the code appeared (idle, mid-cycle, after a heavy bag) and whether you heard…
Open referenceSubmit a few details and a dispatcher confirms a two-hour arrival window. Need it today? Call—we route the next available technician to your zip.
